|
| ブランド名: | HUIHAO KASITE |
| モデル番号: | HH-SS-RPN |
| MOQ: | 1平方メートル |
| 価格: | USD20-USD28/M2 |
| 支払条件: | T/T |
| 供給能力: | 30 日あたり 6000 平方メートルの落下防止ネット |
Stainless steel wire rope fall prevention net. The cable diameter is the primary factor determining the net's load-bearing capacity. For general low-level protection (e.g., indoor railings), a 3mm-5mm diameter is sufficient. For high-altitude applications (e.g., work platforms, building exteriors), a 6mm-8mm diameter is necessary to handle the impact of a falling person.
The Stainless Steel Wire Rope Fall Prevention Net opening size should match the specific hazard. For personnel safety, an opening between 50mm-100mm prevents limbs from getting caught or stops a fall. For containing small tools or equipment, a smaller 20mm-50mm opening is recommended. Note that extremely small openings add significant weight, reducing flexibility.
Finally, consider the overall load rating. Standard civilian nets should hold 500kg-800kg per section. For industrial use (e.g., bridge work, large equipment), choose Stainless Steel Wire Rope Fall Prevention Net rated for over 1000kg per section. Always ensure the product has passed official fall protection safety certifications, as this report validates the safety of the specifications.
The following table outlines common, high-safety starting-point specifications for typical industrial or commercial applications with low to medium fall risk (e.g., fall clearance ≤ 10 meters). This is for preliminary reference only and is not a final design solution.
| Application Scenario | Recommended Mesh Opening | Recommended Cable Diameter | Key Considerations & Explanations |
|---|---|---|---|
| Pedestrian Walkways, Low-level Platforms (Fall clearance ≤ 5m) | 100mm x 100mm | ≥ 3.0 mm | Primary purpose is to prevent tools/small parts from falling, while also ensuring personnel safety. Stainless Steel Wire Rope Fall Prevention Net's Openings should not be too small to reduce weight and wind load. |
| Equipment Layers, Elevated Work Platforms (Fall clearance 5-10m) | 75mm x 75mm to 100mm x 100mm | ≥ 4.0 mm | This is the most common specification range for Stainless Steel Wire Rope Fall Prevention Net. Must balance net strength with mesh density to effectively catch a falling person. |
| High-altitude, High-safety Areas (e.g., Atriums, Viewing Galleries) | 50mm x 50mm to 75mm x 75mm | ≥ 5.0 mm | Smaller openings prevent body parts from pushing through, providing greater psychological security. Thicker cables are required to withstand significant impact forces. |
A Stainless Steel Wire Rope Fall Prevention Net is composed of multiple flexible cables, each made from numerous twisted steel wires. These cables are manufactured by laying multiple wires into strands, which are then helically wound around a core in specific patterns.
Widely used in material handling machinery, they serve for lifting, pulling, tensioning, and load-bearing.
